Breaking News

10Gbps Internet: Super Broadband’s Secrets

Guys, I did it! I recently upgraded my home to a 10Gbps Fiber-optic broadband plan via Sonic. Yes, that’s 10Gbps Internet or ten times the speed of Gigabit.

And no, it’s not expensive, just $40/month (no contract required), which is very reasonable, if not cheap, in the USA. To put things in perspective, I’ve been paying almost double the amount for a Gigabit Comcast Cable connection.

So, where I live, in the San Francisco Bay Area, Sonic Fiber-optic is a great deal. I’d recommend it. And that’s the good news. The not-so-good is, well, there’s more, a lot more, to getting 10Gbps than just the broadband subscription.

This post will talk about that and set some expectations. But in a nutshell, 10Gbps is literally the Gigabit broadband ten times over.

Most importantly, this so-called “quest” for 10Gbps Internet is to satisfy my fabricated vain achievement — so I can say I’ve gotten that milestone. Above certain Gbps, the broadband speed makes zero difference in real-world usage.

Dong’s note: This post contains a referral link, available to all Sonic Fiber-optic subscribers, that would give the account holder some credit for new signups. This is not a review of the Internet service.

Asus RT AX89X 2
10Gbps Internet: With two 10Gbps ports (one Multi-Gig and one SFP+), the Asus RT AX89X is an excellent choice for those with super-fast Internet, but by itself, the router is far from enough.

10Gbps Internet: Broadband is no longer the bottleneck

For years, the sub-Gigabit broadband connection has always been the bottleneck in our connection to the outside world — it’s still is for many, if not most citizens of the world.

No matter how fast your Wi-Fi is, if your Internet is 100Mbps, then you can’t download anything faster than 100Mbps, on a good day.

Then we have Gigabit-class Internet — something that’s between 500Mbps to 1Gbps. But at the same time, we also have Wi-Fi 6 and Wi-Fi 6E that currently can deliver up to 2.4Gbps of local speed – that’s the currently top-tier four-stream (4×4) at 160MHz — or Gig+ sustained real-world rates.

As the result, it’s always been incorrect to use an Internet speed test to gauge your Wi-Fi speed — chances are the former is the bottleneck. I ranted long and hard about that in this post on speed testing.

Common Gigabit-related terms

Gigabit: A connection that’s 1Gbps or 1000Mbps. It’s currently the most popular wired connection standard.

Gig+: A connection that’s faster than 1Gbps but slower than 2Gbps. It often applies to Wi-Fi 6 or Internet speeds.

Multi-Gigabit: That’s multi-gigabit — a connection that’s 2Gbps or faster.

Multi-Gig: A new BASE-T wired connection standard that delivers 100Mbps, 1Gbps, 2.5Gbps, 5Gbps, or 10Gbpsd, depending on the devices involved.

A 10Gbps — that’s 10 Gigabit Ethernet, a.k.a 10GE, 10GbE, or 10 GigE — broadband connection changes all the above. The Internet is now the fastest pipe in your home. But it also brings about other issues for those wanting to get the absolute most out of their connection.

The question is, how do we know we actually get 10Gbps? Let’s me break it right away: we can’t.

At best, we can only get close 10Gbps since the equipment has overhead, and 10Gbps is the highest ceiling speed grade any home router or switch can handle.

In other words, if you want to see a real 10Gbps sustained rate, you will need equipment that can handle 20Gbps or faster. Now that’s just too much.

And even when you just want a “sorta 10Gbps” connection. Things can be challenging, too. I speak from experience.

Let’s start with the hardware that I use.

Multi Gig Internet Speed Test Sonic Fiber optic
10Gbps Internet: Here’s my general Internet connection these days.

10Gbps on the client end: Wired only, and it’s tricky

Above is a screenshot of my current Internet speed. It’s fast, alright, but you’ll note that it’s not 10Gbps, but just about 2.5Gbps. Did I get ripped off? Nope.

My desktop computer used for the test — a relatively compact gaming machine powered by the Asus ROG Strix Z590-I motherboard — has a built-in 2.5Gbps network adapter. And the Internet connection saturated that Multi-Gig connection.

Eventually, there will be a motherboard with a built-in 10Gbps network port. For now, the only way to get a 10Gbps network on a computer is via a PCIe add-on adapter.

That was not an option with my Z590-I since I already used its only qualified PCIe slot for a gaming graphic card.

Upgrading a desktop computer to 10Gbps Multi-Gig is similar to upgrading it to Wi-Fi 6/E. You get an add-on card, assemble it on a qualified PCIe slot and install the software.

The biggest and only difference is: a 10Gbps NIC card requires a four-lane (x4) or faster PCIe slot instead of a single-lane (x1).

On most desktop motherboards, the only PCIe slot applicable is the 16-lane slot, generally reserved for a graphics card. In this case, you can only upgrade if you use the computer’s onboard video adapter.

How about Wi-Fi, you might ask?

As I mentioned above, even the best-to-date Wi-Fi connection can’t go over 2.4Gbps of ceiling speed. So it’s virtually impossible to experience 10Gbps via Wi-Fi — not even a quarter of that.

When (or if) 4×4 clients are available, we’ll get some 4.8Gbps of ceiling speed out of Wi-Fi, still less than half of 10Gbps.

So, if you want to experience 10Gbps on a computer, upgrading it to a 10Gbps wired adapter is the only way for now. And for my testing, I’ve had a couple of computers running these adapters for a few years.

But even then, that’s only half of the equation.

Sonic 10Gbps Fiber optic ONT
10Gbps Internet: My Sonic Fiber-optic ONT in action. Note the lit 10Gbps indicator light. (I took this picture during the daytime but the place where I put my geek stuff is a messy little room in the basement with no window.)

10Gbps Internet on the router end: Limited options

There are about two dozen of home Wi-Fi routers that come with Multi-Gig wired capability. And, not to brag, I’ve reviewed them all except for the latest eero Pro 6E, which I deliberately avoided.

Of those, there are just four that are 10Gbps-capable. (Hit the button below to view their ratings and review links). The rest can only handle the 5Gbps or 2.5Gbps speed grades and are clearly out of the question in this glorious quest.

Extra: Current 10Gbps-capable Wi-Fi routers

Home Wi-Fi routers with 10Gbps wired capability

Below are the current four home Wi-Fi routers that are 10Gbps-capable, in review order with the latest on top.

Netgear Orbi RBKE960 Series: 10Gbps Multi-Gig WAN + 2.5Gbps Multi-Gig LAN
Netgear Orbi RBKE960 Quad band Mesh Wi Fi 6E System Box

Pros

Powerful hardware with Quad-band Wi-Fi and Multi-Gig wired backhaul support

Excellent Wi-Fi coverage, fast performance

More Wi-Fi networks than previous Orbis, including two additional virtual SSIDs

Cons

No web-based Remote Management, few free features, Mobile app (with a login account and even subscriptions) are required to be useful

Rigid Multi-Gig ports’ roles, few Multi-Gig ports

The 2nd 5GHz-band is unavailable to clients even with wired backhauls, no 160MHz channel width on 5GHz

Limited Wi-Fi customization, bulky design


QNAP QHora-301W: Dual 10Gbps Multi-Gig ports
QNAP QHora 301W Wi Fi 6 Router

Pros

Reliable Wi-Fi performance

SD-WAN and other enterprise-class features

Cons

Expensive for the modest Wi-Fi coverage

Some common settings are missing

No real Dynamic DNS, QoS, and Parental Controls

Useless USB-related features


Zyxel Armor G5: 1x 2.5Gbps WAN + 1x 10Gbps LAN Multi-Gig ports
Zyxel Armor G5 4

Pros

Two Multi-Gig network ports

Cons

Overall buggy, especially the USB-related features

Severely lacking in features: Not mesh-ready, no Dual-WAN, no Link Aggregation, no QoS

Parental Control is a joke


Asus RT-AX89X: Dual LAN/WAN 10Gbps (Base-T and SFP+) ports
Asus RT AX89X Folded

Pros

Excellent Wi-Fi performance

Uniquely cool design with two 10Gbps network ports

Eight Gigabit network ports with Dual-WAN and Link Aggregation

Super-fast network-attached storage speed when coupled with an external drive

Tons of useful features, including free-for-life real-time online protection and AiMesh

Cons

A bit buggy at launch, relatively expensive

Bulky physical size with an internal fan — potential heat issue in hot environments

Not wall-mountable, no universal backup restoration

Of the four above, only the Asus RT-AX89X and QNAP QHora-301W have two 10Gbps ports — we’d need one for the WAN connection and the other for the LAN side.

Considering the Asus is a much better router in terms of hardware specs and features, I decided to go with it.

(I used the QNAP briefly and it delivered a similar 10Gbps experience as described below.)

The RT-AX89X has two 10Gbps ports. One is a Multi-Gig (Base-T), and the other is an SFP+.

The Fiber-optic ONT Sonic put in my house, like most ONTs, used an RJ45 port, so I used the router’s 10Gbps Multi-Gig port for the Internet connection. The WAN side was straightforward.

Extra: BASE-T vs SFP+

The BASE-T (or BaseT) port type refers to the wiring method used inside the network cable and the connectors at its ends, which is 8-position 8-contact (8P8C). This type is known via a misnomer called Registered Jack 45 or RJ45. So we’ll keep calling it RJ45.

But there’s also SFP or SFP+ (plus) port type, used mostly for enterprise applications, that’s different physically but has the same networking principles as Base-T. SFP stands for small form pluggable and is the technical name for what is often referred to as Fiber Channel or Fiber.

An SFP+ port has speed grades of either 1Gbps or 10Gbps — the older version of SFP can only do 1Gbps. The two share the same port type. That’s all you need to know about SFP. Base-T is the more popular by far.

Generally, you can get an adapter to use a BaseT device with an SFP or SFP+ port. Still, in this case, compatibility can be an issue — a particular adapter might only work (well) with the SFP/+ port of certain hardware vendors.

On the LAN side, things were a bit more complicated. I had no computer with an SFP+ port and didn’t want to get an adapter. That, plus the fact I’d like to use more wired Multi-Gig devices, meant I’d need a switch.

Asus RT AX89X 10Gbps Internet 1
10Gbps Internet: Here’s my Asus RT-AX89X with the 10Gbps Base-T Multi-Gig port connected to the Fiber-optic ONT and the 10Gbps SFP+ connecting to the Zyxel XS1930-12HP Multi-Gig switch.

10Gbps-capable switches: Still very expensive

While Gigabit switches are a dime in a dozen and relatively affordable, Multi-Gig switches, especially those capable of 10Gbps, are still scarce. And they are all expensive.

And I needed one that has an SFP+ port. Of all switches I’ve reviewed, the Zyxel XS1930-12HP is the only one that fits the bill, so I used it. If you wonder, this switch’s current price is around $1000 and it’s actually less expensive than many of its peers.

There are more affordable Multi-Gig switches, but they have mostly lower-grade ports (2.5Gbps or 5Gbps).

Multi Gig Switches Performance by Dong Knows Tech
10Gbps Internet: None of the Multi-Gig switches I’ve tested deliver the full 10Gbps (10,000 Mbps) speed. But that might just be the case with all home equipment at this grade.

It’s worth noting that all switches have overhead, and the Zyxel didn’t deliver the full 10Gbps in my testing. The chart above shows the performances of all Multi-Gig switches I’ve reviewed.

That said, so far on the equipment front, I’ve used the following:

I’ve gotten these devices for review and testing purposes over time, but if you buy them today, that’d cost you some $2000.

(What I didn’t tell you is I also use a pair of ZenWiFi Pro ET12 as my Multi-Gig Wired mesh satellites. But you can skip this since, clearly, I’m nuts when it comes to networking.)

And that brings us to my actual Internet speed out of my 10Gbps Fiber-optic broadband, using this souped-up set of equipment.

My real Multi-Gig Internet speed

Upon completing the installation, the friendly Sonic tech did a test at the ONT with his special equipment.

“8 gigs down and 5 gigs up,” he said, “It’ll probably get faster once the ONT has been updated. Give it a day or two. It’ll be different.”

And he didn’t lie. During the next couple of days, using the equipment listed above, I generally got speeds between 6Gbps to 8Gbps in both directions.

Those weren’t exactly 10Gbps but, to be fair, they might have been the speed of any of the parts involved, be it the router, the switch, or the network adapters.

Dong Knows Tech 10Gbps Internet Speeds
10Gbps Internet: My Internet speed on a 10Gbps-capable desktop. I did this test without unplugging any other active network devices, including my servers.

I could eliminate the go-betweens and other devices that might be using the broadband connection by connecting one of my 10Gbps-capable desktops to the ONT directly to do a real test, and I did think about that.

But that proved to be too much work due to the layout of my home. (OK, I couldn’t run long cables willy nilly and risk having my children, or worse, my wife, tripping over them.)

Most importantly, I didn’t care. Even on my office “work” desktop mentioned above, 2.5Gbps is already crazy fast — that’s more than 2.5 times the speeds of Comcast on the download pipe and hundreds of times faster on the upload. Anything above that is ridiculous.

One thing is clear, Fiber-optic broadband is so much better than cable. The speed aside, I consistently get ping and jitter values — those that determine the quality of a connection — below a few milliseconds. In many tests, they were at zero.

My Comcast Cable connection generally has pings at 15 milliseconds, and Comcast does impose a monthly data cap of 1.25 terabytes. Sonic has no monthly data cap, and with that comes the feeling of freedom.

Multi-Gig Internet and its hidden benefits

In any case, my broadband connection is now easily in the Multi-Gig realm. The crazy speeds, apart from being, well, fast, also brings in some benefits that you can’t have with sub-Gigabit.

QoS is (mostly) no longer applicable

The first is probably the fact you don’t need to use Quality of Service anymore. I wrote about QoS in this post, but it’s a function that prioritizes the broadband connection to prevent a device from hogging all the bandwidth.

Considering most devices has Gigabit or Wi-Fi at best, the network adapter itself is now the bandwidth guardrail. For example, if you host a BitTorrent client on a computer with a Gigabit connection, the client can’t use more than 1000Mbps of Internet bandwidth anyway.

If you use multiples clients like that, then it might still be a good idea to use QoS, but you get the idea.

And by the way, in my case, the Fiber-optic also improves real-time communication a great deal, likely thanks to the better connection quality mentioned above.

Sonic Order
Here’s my Sonic order form. Again, you only need the ONT.
A bit of digression: I almost busted laughing seeing what Sonic offered as Wi-Fi equipment for its 10Gbps Internet. It couldn’t be any worse of a choice, which was why I made the screengrab. But the initial doubt about the provider’s real broadband speeds slowly melted away after over a week of real-world experience.

A new level of personal server

Thanks to the much aster upload speed, you’d note that all personal remote server applications work much better.

My business partners and I use several Synology NAS servers in multiple locations and sync data between them as off-site backups. The super-fast broadband makes this much better. At least on my end.

And if you use a media server, such as Plex, streaming to a remote part is now just like using Netflix or Hulu in terms of speed and video quality. Actually, it was better.

The Internet speed test is now applicable for local Wi-Fi

This part applies directly to what I do on this website. From now on, I can confidently use the Internet as the base to test local Wi-Fi, and I’ve tried that with the Netgear WAX630E.

I’ll keep my current test methodology but knowing that the Internet is no longer the bottleneck will make my work much easier.

Among other things, I’ll be able to determine if a router is consistent on both LAN and WAN sides, if its WAN port is actually Multi-Gig or not, etc. Rest assured that I’ll add this new information in future reviews.

The takeaway

Again, it’s impossible to get a real sustained 10Gbps connection — we need faster equipment to have that. It was likely for that reason, Sonic told me that my broadband was “up to” 10Gbps. And so far, that proved to be a genuine promise.

So 10Gbps broadband is great. Just be aware of the hidden costs if you want to truly experience all or even just most of it. But ultra-fast broadband still works great if you use existing Gigabit equipment.

In daily usage, though, any Internet connection faster than1Gbps makes no difference in most cases — the remote party or those in between will be the bottleneck anyway. And the 10Gbps pipe only means you can have multiple such connections simultaneously.

As I said before in the post about Gigabit Internet, it’s not how fast a connection is but what you do with it that matters — you should appreciate and make the most of what you have is the point. Speaking of which, I’ll still keep my “slow” Gigabit Cable connection for now. Dual-WAN has its unique benefits, and that’ll be another story.

In the meantime, if you’re curious about how fast your Internet is, click the Go button below to find out. And don’t be jealous!


• This test transfers data between your device and an Ookla test server.